The heating element consists of five heating rods that are mutually interconnected and equipped with connecting bolt terminals. To fill the complete diameter D, two heating elements should be used, with an exception at models 014 to 017,
where three elements should be used. The elements are interconnected by means of screws M5.
The heating element is intended for heating of moulds, heating of heads of injection presses etc. with controlled operating temperature in the range of 150 °C to 300 °C. Maximum operating surface temperature of the heating element sheath
is 500 °C.The temperature control device is not a part of the delivery.
typové číslo objednací | V | W | D | počet ks do kružnice |
---|---|---|---|---|
480890010 | 230 | 250 | 100 | 2 |
480890020 | 230 | 375 | 125 | 2 |
480890030 | 230 | 450 | 140 | 2 |
480890040 | 230 | 500 | 160 | 2 |
480890050 | 230 | 600 | 180 | 2 |
480890060 | 230 | 600 | 200 | 2 |
480890070 | 230 | 700 | 220 | 2 |
480890080 | 230 | 875 | 250 | 2 |
480890090 | 230 | 950 | 280 | 2 |
480890100 | 400 | 1050 | 315 | 2 |
480890110 | 400 | 1250 | 355 | 2 |
480890120 | 400 | 1375 | 400 | 2 |
480890130 | 400 | 1575 | 450 | 2 |
480890140 | 230 | 600 | 315 | 3 |
480890150 | 230 | 700 | 355 | 3 |
480890160 | 230 | 875 | 400 | 3 |
480890170 | 230 | 950 | 450 | 3 |
Backer Elektro CZ a.s. | Člen skupiny NIBE Švédsko | Naši partneři | ||
Adresa: |
Poličská 444, |
|||
Copyright © Backer Elektro CZ, 2002-2021